Suffix code

Model Code Description
TD510- Programmable temperature controller
Display 1     display(5.7" TFT LCD)
N     None
Input/output 1   8 input points/6 output points(1 module)+Power module+Control module
2   8 input points/14 output points(2 modules)+Power module+Control module
3   16 input points/16 output points(3 modules)+Power module+Control module
N   No input/output
Language S Korean, English, and Chinese(Simplified)
T Korean, English, and Chinese(Traditional)
※ This product consists of the display and control(power, control, input, and output modules).
    (Up to 32 contact input/output points, respectively)

[Components]
Product Model Description
Display TD510-1N Display
Control module TD510-MAIN Temperature 2-channel control module
Power module TM-PWR Power module
Input module TM-DI Module with 16 input points
Output module TM-DO Module with 8 output points
Input/output module TM-DIO Module with 8 input and 6 output points

Specification

[Sensor input]
Input type 2 types of thermoresistor (Pt-100, KPt-100),
11 types of thermocouple (K, J, E, T, R, B, S, L, N, U, Wire 5-26)
4 types of DC voltage (-10 - 20 mV, 0 - 100 mV, 1 - 5 V, 0 - 30 V)
Sampling cycle 250 ms
Measured current of thermoresistor(RTD) Approx. 0.21 mA
Input resistance Thermocouple : 1 ㏁ or more; DC voltage : 1 ㏁ or more
Allowable wire resistance Thermoresistor : Max. 100 Ω/wire
(For RTD between -100.00 and 150.00, max. 10 Ω/wire)
Thermocouple : 200 Ω or less
DC voltage : 2 ㏀ or less
Influence of wire resistance Thermoresistor : ±0.3 ℃/10 Ω
(3 wires must have the same wire resistance)
Allowable input voltage Thermocouple : ±10 V d.c. or less, DC voltage : ±33 V d.c. or less
Error of reference junction contact(RJC) temperature ±1.5 ℃ (0 ~ 50 ℃)

[Performance]
Display accuracy
RTD, DC voltage : ±0.1 % of FS ±1 Digit
TC : ±0.15 % of FS ±1 Digit (Exclude RJC temperature error), Refer to input table for details
Insulation Resistance 20 ㏁ or 500 V dc between power supply terminal and FG terminal.
Internal voltage
Between 1st and 2nd terminals : Min. 1500 V a.c for 1 min
Between 1st and FG terminals : Min. 1500 V a.c for 1 min
Between 2nd and FG terminals : Min. 1500 V a.c for 1 min
1st terminal : Power terminal (except FG terminal) and relay output terminal
2nd terminal : Sensor input terminal, contact input terminal, communication terminal

[General Specifications]
Power voltage 100 - 240 V a.c.
Voltage fluctuation rate ± 10% of supply voltage
Power Consumption
 
25 VA (Based on TD510-13)
Ambient temperature 0 ~ 50 ℃
Ambient humidity 20 ~ 90 % RH (However, no condensation )
Storage temperature -25℃ ~ 70℃
Internal vibration 10 - 55 Hz, amplitude 0.75 mm, 4 directions in 3 directions, 5 minutes / cycle
Internal shock 147 m/s², 3 times in 3 directions
Dimensions
display : 145(W) X 145(H) X 42.3(D), Power module : 50(W) X 107(H) X 112(D)
Control module : 40(W) X 107(H) X 112(D)
weight 1.79 Kg (Based on TD510-13)

[Control function]
Input Input calibration(Sensor bias) EUS (0 ~ 100%)
Scaling(Scaling) DC voltage(VDC) : Input scaling according to conversion range
Input filter(LPF) 0 - 120 S
Control output control output
Simultaneous heating and cooling control
Voltage output (SSR) or current output (4 - 20 ㎃ d.c), relay output selection
Control operation operating mode Program control, device control selection
Pattern 100 patterns(1 pattern/100 segments)
Segment 2000 segments
PID group 4 groups per channel (Level PID)
Auto tuning Auto tuning according to target setting value
Proportional band 0.00 - 100.00 % (For 0.00 %, ON/OFF control)
Integral time 0.0 - 3,000 S (OFF when 0 S)
Derivative time
ON/OFF control Set 0.0 to proportional band(PB)
Normal Open/Normal Close According to selection of Normal Open/Normal Close for control output
Control mode Heating Control / Cooling Control
Control method Channel unused, simultaneous channel operation, individual channel operation selection
Hysteresis EUS (0 ~ 100 %)
Transmission output Temperatre(Ch.1 and 2) 4 - 20 mA d.c.
Specific value(PV), Setting value(SV) and Output(MV)
Scaling Auto scaling for defined upper/lower limit range(4 - 20 mA d.c.)
Alarm setting Alarm setting System alarm : 8 points
Assign 4 of 8 pattern alarms to a pattern
Alarm type Absolute upper/lower limit, Offset upper/lower limit, and Within/Out of range
Absolute alarm setting range EU (0 ~ 100 %)
Offset information setting range EUS (-100 ~ 100 %)
Hysteresis EUS (0 ~ 100 %)
Memory specifications Internal memory Non-volatile memory : 80 MB – Saving of 15 days at 1 S interval
External memory SD card(2 GB) : Saving of 1 year at 1 S interval
Saving interval 1 ~ 360
Memory information Program information, setting value, recovery, and temperature setting/specific/output value

[Display specifications]
Display TFT color LCD (115.2 X 86.4 mm : 5.7″)
Number of Pixels 640 X 480 Pixel
Back light LED Back light
Touch type Resistive type (4 Wires)
Language Korean/English/Chinese(Simplified)

[Output specifications]
Contact output(DO) Up to 32 relay A Contact 30 V d.c. 3 A max, 250 V a.c. 3 A
B Contact NO : 30 V d.c. 5 A max. 250 V a.c. 5 A
NC : 30 V d.c. 1 A max. 250 V a.c. 5 A
Control output SSR output ON : 18 V d.c. Pulse voltage(800 Ω or more load resistance)
SCR output 4 - 20 mA d.c. (600 Ω or less load resistance)
Relay output 30V d.c. 3A max, 250V a.c. 3A
Transmission output Current output 4 - 20 ㎃ d.c
Load resistance 600 Ω or less load resistance
Output limit -5.00 ~ 105.00 %
Output type

Specific value(PV), Setting value(SV), Output(MV), and random

Refresh interval 250 ㎳

[Contact input]
Max. number of input 32 points
Input type No-voltage contact input
Operational conditions During operation/Always

[Communication specifications]
Applied standard RS485
Max. connection number 1:32 (address 1 - 99)
Communication type 2-wire
Synchronization Asynchronous
Communication distance Approx. 1.2 km or less
Communication speed 9600, 19200, 38400, 57600, 115200 bps
Data Length 7/8 Bits
Parity Bit NONE / EVEN / ODD
Stop Bit 1 / 2 Bit(s)
Protocol PC-Link / PC-link + SUM / MODBUS ASC / MODBUS RTU
Response Time 0 ~ 100 ㎳

[Range configuration by input type ]
Input type Measuring range (℃) Level
Thermoresistor
(RTD)
Pt100 Ω Pt-1 -200.0 ~ 640.0 ±0.1 % of FS
±1 Digit
KPt100 Ω KPt-1 -200.0 ~ 500.0
Thermocouple
(TC)
K K-0 -200 ~ 1370 ±0.15 % of FS ±1 digit
K-1 -200.0 ~ 1370.0 ±0.15 % of FS ±1 digit(*2)
J -200.0 ~ 1200.0 ±0.15 % of FS ±1 digit(*2)
E -200.0 ~ 1000.0 ±0.15 % of FS ±1 digit(*2)
T -200.0 ~ 400.0 ±0.15 % of FS ±1 digit(*3)
R 0.0 ~ 1700.0 ±0.15 % of FS ±1 digit(*4)
B 0.0 ~ 1800.0 ±0.15 % of FS ±1 digit(*1)
S 0.0 ~ 1700.0 ±0.15 % of FS ±1 digit(*4)
L -200.0 ~ 900.0 ±0.15 % of FS ±1 digit(*2)
N -200.0 ~ 1300.0 ±0.15 % of FS ±1 digit(*3)
U -200.0 ~ 400.0 ±0.15 % of FS ±1 digit(*3)
Wre 5-26 0.0 ~ 2300.0 ±0.15 % of FS ±1 digit(*4)
 PL-II  0.0~1390.0 ±0.15 % of FS ±1 digit 
DC voltage
(VDC)
-10 - 20 mV -10.00 ~ 20.00 ±0.1 % of FS
±1 Digit
0 - 100 mV 0.00 ~ 100.00
1 - 5 V 1.00 ~ 5.00
0 - 30 V 0.00 ~ 30.00
(*1) 0 ~ 400 ℃ : ±5 % of FS ±1 digit
(*2) -200 ~ -150 ℃ : ±0.2 % of FS ±1 digit
(*3) -200 ~ -150 ℃ : ±0.4 % of FS ±1 digit, -150 ~ -100 ℃ : ±0.2 % of FS ±1 digit
(*4) 0 ~ 200 ℃ : ±0.2 % of FS ±1 digit