Suffix code

 Model Code Information
UP 25 F- 8

inductive type proximity sensor

Sensing area size 25           please refer to the dimension (25 x 49 x 10 mm)
Structure type F         Flat type
Sensing distance 8       8 mm
Power and Output type N     D.C NPN output
P     D.C PNP output
A     A.C 2 wire type
T     D.C 2 wire type(Polarity)
U     D.C 2 wire type (No polarity)
Output state A   Normal open(N.O)
C   Normal close(N.C)
Connection structure * No indication (Cable type)
CR Relay connector

Specification


Inductive D.C 3 wire type/2 wire type
Model D.C 3 wire type D.C 2 wire type
NPN UP25F-8N Polarity UP25F-8T
PNP UP25F-8P No Polarity UP25F-8U
Size 25 X 49 Flat type 25 X 49 Flat type
Standard sensing object(㎜) Iron 25 X 25 X 1
Sensing distance 8 mm
Setting distance 0 ~ 6.4mm
Hysteresis Less than 10% of sensing distance
Response frequency 350 Hz
Power supply voltage 12 - 24 V a.c
(Usable voltage range 5 - 35 V d.c)
12 - 24 V a.c
(Usable voltage range 10 - 30 V d.c)
Control output Open/Close capacitance 200 ㎃ max (Resistive load) 100 ㎃ max (Resistive load)
Residual voltage Max 1.5 V Polarity : max 3.5 V, No polarity : max 5 V
Current consumption Max 6 mA -
Leakage current - Max 1 mA
Operation indication Red LED
Protective circuit Power reversely connected protective circuit,
Surge protective circuit and over current protective circuit are built in.
Degree of protection IP67 (IECstandard)
Connection structure Cable type(Standard cable length 2m), Relay connector type
Material Case : PBT resin, Cable holder : Polyester elastomer
Weight Cable type approx. 60g approx. 60g
Relay connector type approx. 20g approx. 20g


Inductive A.C 2 wire type
Model UP25F-8A
Standard sensing object(㎜) Iron 25 x 25 x 1
Sensing distance 8 mm
Setting distance 0 ~ 6.4mm
Hysteresis Less than 10% of sensing distance
Response frequency 20 Hz
Power supply voltage 100 - 240 V a.c (Usable voltage range 90 - 250 V a.c )
Control output Open/Close capacitance 200 mA max (Resistive load)
Residual voltage Max 10 Va.c
Leakage current Max 2.2 mA
Operation indication Red LED
Protective circuit Surge protective circuit built in.
Degree of protection IP67 (IEC standard)
Connection structure Cable type(Standard cable length 2m), Relay connector type
Material Case : PBT resin, Cable holder : Polyester elastomer
Weight Cable type approx. 60g
Relay connector type approx. 20g